Your position: Home > Project Electronics > Relay Modules

Kuman 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM K49

Item Code: K49
    Please select the information you wantX
Shipping Cost:
Estimated between
  • Description
Key Features:
● Be able to control various appliances, and other equipment with large current
● Equiped with high-current relay, AC250V 10A ; DC30V 10A
● 5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current
● Application:Supports all MCU control, The industrial field, PLC control, Smart home control
● Indication LED's for Relay output status

● Power supply: 5V
● Module size: L55*W18.5*H75 mm Net weight: 61g
● 4 screw fixing hole: Hole diameter: 3.1mm Spacing: 68*48mm

Indicator Description:
RED is power indicator light, Another four respectively four relays, When the corresponding relay is open,Glow green

Packing List:
● 1x4-way Relay Switch Module
Customer Reviews
Recent Reviews
  • Mar 20, 2017
produit conforme à mes attentes, j'ai pu l'utiliser desuite et il rempli pleinement sa fonction, je le recommande à d'autres acheteurs éventuels.

  • ByJacob T
  • Nov 19, 2016
I bought this for a home automation project for use with the arduino, but it can really work with anything. Sadly, it has very poor documentation from the seller, but these boards are built much the same from most manufacturers and the documentation is easily available.

One thing that I noticed immediately were the isolation slots that were physically cut into the PCB. This is actually a GREAT feature! Since this relay is meant to drive an isolated load, the problem is that dirt or oils on the PCB could allow small amounts of current to leak between your isolated load and your arduino, which would probably kill it. Since there are physical slots cut in the board, current has no chance to flow and your very electrically sensitive Arduino can stay safe while you drive your lamps or motors from the relay side.

It really shows how much they manufacturer cared that they took the extra effort.

If you are confused on how to wire this relay, refer to this website. It has great tips for newbies and a step-to-step guide on how to wire it.
One thing to note: relays are rated for a certain life cycle. You can drive them up to their rated voltage and amperage and they will work fine, but the lower power you drive with them the longer they will last. If you are planning on driving larger AC ( Alternating Current ) loads (>10 amps), I would recommend using a Solid State Relay.

Now for the full disclosure. I was given this item in order to give an honest review on it. ALL MY REVIEWS ARE 100% honest. If i change my opinion on the product after its been used for a while, I always go back and change my review.