Free Express Shipping On Orders Over $180.00
Your position: Home > DEV Tools > DSO

Kuman Mini DSO Shell Oscilloscope DIY Kit 15001K

Open Source 2.4" Color TFT LCD + Shell + Parts + Probe (SMD pre-soldered)
Item Code: 15001K
Price:
USD
$20.51
(24% OFF)
    Please select the information you wantX
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
+
-
Units
  • Description
Specifications
Features:
● Update from 13803K: The sensitivity of DSO Shell has been extended in both directions and is higher and wider than DSO138. It reaches 5mV/div --- 20V/div while DSO138 is only 10mV/div --- 5V/div
● More Applications: Display and MCU are now mounted on the same board (mainboard) to avoid using inter-board pin-headers, Analog channel is placed on a separated board which contains most user install parts. This brings in better separation between analog and digital circuits. Without the analog portion the mainboard can be used in many other applications
● Rotary encoder has been added. It makes parameter adjustment much quicker and easier
● DSO Shell comes with full enclosure. The front panel and top/bottom brackets are flexible for easy user modification
● Detailed assembly instructions are provided in combination with troubleshooting guide and schematic

Specifications:
● Number of Channel: 1
● Analog Bandwidth: 0 - 200KHz
● Sensitivity: 5mV/Div - 20V/Div
● Sensitivity error: < 5%
● Resolution: 12-bit
● Input Impedance: 1M ohm
● Maximum Input voltage: 50Vpk
● Coupling: DC, AC, GND
● Trigger Modes: Auto, Normal, Single
● Trigger Types: Rising/falling edge
● Trigger Position: 1/2 of buffer size fixed
● Display: 2.4 inch color TFT LCD with 320 x 240 resolution
● Power Supply: 9V DC (8 - 10V acceptable), NOT INCLUDED
● Dimension: 115mm X 75mm X 22mm
● Weight: 100 gram (not including cables and power supply)

Packing List:
● 1* DSO Shell kit with SMD parts on analog board pre-soldered
● 1* BNC-clip cable
● 1* Users Manual

Kindly Remind:
● DSO Shell runs on 9V (do not use power voltage higher than 10V!)
● Power Supply is not included


Customer Reviews
Recent Reviews
  • ByDan Hanson
  • Aug 15, 2017
Kit de construcción impresionante DIY. Construcción sorprendentemente fácil, para una herramienta real, utilizable
Puede comprar algo tan bueno, estoy muy emocionada.

  • Bycorba
  • Jun 28, 2017
直ぐに届きました。使用する楽しみもあるけど作る楽しさが有って良いね。あれだけレビューにも書かれているのに基板の裏表間違いをやらかして手直ししましたw
制作自体は難しく無いけど波形が表示された時は感動します。簡易的なオシロだから素人が持つにはピッタリです。DIYが好きな人なら持ってても良いアイテムですね。ただ、日本語マニュアルと書いて有ったが英語マニュアルしか入ってません。写真付きでステップ毎に進めるように書いてあるので英語でも問題は無いと思います。あ、電源スイッチを有効にするには基板上の0Ωのチップ抵抗を取り除かなければいけないので、お忘れなく!

  • By山口
  • Jun 28, 2017
特別問題はありませんでした。 内容としては、以前買ったものよりバージョンアッフ゜されていました。 品物もすぐに届いたし満足です。

  • ByRobert Carnaroli
  • Jun 01, 2017
I bought two. One had a damaged lcd backlight ribbon and they replaced it no problem. The builds eent pretty easily and the units work well. Check the jye site though and do the fw update. Fixes and features were updated very recently. Get a sparkfun ftdi to do the flashing.