Your position: Home > Raspberry Pi > Cables / wires

Kuman RPi GPIO Breakout Expansion Board T-Cobbler plus with 20cm FC40 40pin Ribbon Cable for Raspberry Pi 3 2 Model B B+ SC05

Item Code: SC05
    Please select the information you wantX
Shipping Cost:
Estimated between
  • Description
Key Features:
● Assembled RPi GPIO T-Cobbler Plus with 8" 40 Pin Ribbon Cable for Raspberry Pi 3 / Zero / 2 / B+ / A+
● 1*GPIO 40P 40-pin Rainbow Ribbon Cable
● 1*GPIO Expansion Board (Assembled T-Cobbler plus V2.2)
● 40 pins are labeled for easy prototyping
● GPIO Adapter Plus for Raspberry Pi B+, Raspberry Pi 2,Raspberry Pi is NOT included

● Specifically designed for Raspberry Pi 2 and the model B+ (Plus)
● Can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard
● Each order comes with a 40 pin ribbon cable and assembled T Type Plus GPIO Expansion Board. You can plug the 40-pin GPIO cable
● between the Pi computer and the T Type Plus GPIO expansion board
● This GPIO expansion board is in a fancy T-shape, which is not as compact, but is a little easier to read the labels

Packing List:
● 1pcs GPIO 40P Breakout Board / Cobbler For Raspberry Pi 2 Mode B & B+
● 1pcs 20cm FC40 40pin Flat Rainbow Ribbon Cable

NOTE: Raspberry Pi development board is not included.
Customer Reviews
Recent Reviews
  • ByBarry R Graziano
  • Jun 01, 2017

  • ByDavid R. Chase
  • Jun 01, 2017
Just got mine today and am in the process of hooking it all up to my breadboard. Super easy to hook up (although it's in the breadboard pretty tight, so if I ever remove it, I'll have to be careful.

On mine, looks like someone reversed the connectors or flipped the wire assembly upside down, as my wires are all in reverse order than both the product pictures and the other user's picture in the other review. So, my 'black' wire (at the end) is on the opposite end of both the Pi headers and the cobbler port. Not an issue as it's all the same gauge and order, but it was confusing me for a moment. :)

Ribbon cable is a bit stiff, but I can work with it.

I'll update if I find anything wrong with the board.

  • Bylucas
  • May 16, 2017
Well marked and well made breakout cable. My one complaint is that the width between the two rows of pins is 3 spaces larger than a standard DIP package so it blocks many holes from being used on a solder-less bread board. This means you have 3 holes for connections on one side and only 2 on the other, even making it 1 space thinner to allow 3 on both sides would be a large improvement.

  • ByMajorLeagueReloader
  • May 16, 2017
Good cobbler setup. Works great with my PI3.