Key Features:
● Compatible with Raspberry Pi 3 2 Model B Rpi B+ B A, The LCD panel Need Kuman 12V 2A power supply, Enter Asin: B01GDX6PW4 to order
● Resolution: 1024x 3(RGB)x600 Panel Size: 7.0 inches
● Display Mode: TN, Normally White, trans-missive
● Easy to connect to your Raspberry pi motherboard and see the project program and pictures by the LCD
Specifications:
● LCD size: 7.0 inches(Diagonal)
● Driver element: a-Si TFT active matrix
● Resolution: 1024*3(RGB)*600
● Display mode: Normally white, Trans-missive
● Dot pitch: 0.05(W) x 0.15(H) mm
● Interface: Digital
Packing List:
● 1* Kuman LCD screen
● 1* HDMI+VGA+2AV Controller Board
● 1* 5-button switch and adjustment panel
● 1* remote controller
● 1*10P ribbon cable.
Driver Board Interfaces:
1.Power supply(5-12V 2A), The LCD Panel donot include power charger, you can order Kuman 12V 2A power supply (Asin:B01GDX6PW4 )from usThe LCD Panel donot include power charger, you can order Kuman 12V 2A power supply (Asin:B01GDX6PW4 )from us.
2.HDMI
3.VGA Connector
4.AV1
5.AV1+AV2
6.Keyboard
7.TTL Signal
8.LVDS Signal 1/2 ch 6bit 8bit
9.12V Backlight
10.Inverter Connector
Notice 1: Power supply NOT included,without Touch Panel, if need Touch Panel, please contact us.
Notice 2: This controller board support Automatically switch to AV2 (View Reversing camera).
Operating voltage: Power supply(5-12V >1A ), can be directly from the computer USB port or power bank!(special reminder: the use of the power plug polarity requirements for: inside positive and outside negative-Positive and negative can not be reversed, so as not to damage the circuit board)
Notice 3: The five buttons are as follows: S1 = Power, S2=Menu/Select, S3=Up, S4=Down, S5=Video Source Select
Notice 4: User Manual can be provided by email, please contacdt us freely.
Please be aware that due to your computer monitor display the color may have some difference between the picture and the physical item
Please according to you to buy the dress fabric, select the corresponding fabric color chart